The pneumatic high-frequency vibration of the pneumatic de-coring hammer is fast and high-frequency, does not damage the vibrating object, and easily knocks down the vibrated object. The pneumatic de-coring hammer has a long service life and is easy to install and maintain.
Effects of pneumatic de-coring hammer
- High vibration frequency (frequency can reach 1200c/min)
- Significant sand removal effect (very little sand residue)
- Relatively long service life (proven by a large number of users)
Basic steps for maintaining and servicing the de-coring hammer
The following steps need to be completed after the de-coring hammer is disassembled:
- Check the condition of each part, clean them or replace them.
- Reassemble the de-coring hammer step by step according to the reassembly steps.
- After reassembly, the de-coring hammer must be lubricated with intermediate lubricating oil.
- The de-coring hammer must be lubricated with lubricating oil regularly.
- When the de-coring hammer does not work properly, the air supply must be cut off.
- If the de-coring hammer has not been used for a long time, the inside of the product must be cleaned with a degreaser.
Conclusion
Since the pneumatic decoring hammer only needs compressed air as the power source, it consumes little gas, is safe and energy-saving, and is an ideal device for use in freezing or high temperature environments. It is suitable for humid, dry, dusty or explosive environments, so it is widely used in foundry workshops to shake sand and decoring!