The pneumatic high-frequency vibration of the pneumatic decoring hammer is fast and high-frequency, will not damage the vibrating object, and can easily knock down the vibrated object. It has a long service life and is easy to install and maintain.
Key Points For Safe Use Of Pneumatic Decoring Hammer
Pre-operation inspection
- Equipment integrity check — Confirm that all parts of the equipment are intact and the power connection is normal to avoid running the equipment with faults.
- Spandrel and tool preparation — Check whether the spindle is clean and undamaged to ensure that it matches the equipment; select a pneumatic decoring hammer of appropriate specifications.
Operation procedure specifications
- Start and run — After pressing the start button, slowly place the spindle and start the cylinder to avoid accidents caused by rapid pressure.
- Monitoring operation status — Pay attention to equipment noise during operation. If abnormalities are found (such as excessive vibration and abnormal noise), stop the machine immediately for inspection.
Maintenance and care
- Regular lubrication — Use intermediate lubricating oil for lubrication after 5-10 hours of work, and use degreaser to clean the inside for long-term idleness.
- Fault handling — Immediately cut off the air supply when working abnormally to avoid self-disassembly of core components; regularly check and replace worn parts.
Precautions
- It is strictly forbidden to touch the moving parts when the pneumatic decoring hammer equipment is running.
- Clean up the residual sand in time after decoring to prevent secondary pollution.
Conclusion
The above measures can effectively ensure the safe use of pneumatic decoring hammer, extend the life of the equipment and improve work efficiency.